06 Sep define upholstery
This copy is on your personal non-business use solely. To order presentation-ready copies of Toronto Star content material for distribution to colleagues, purchasers or customers, or inquire about permissions/licensing, please go to: www.TorontoStarReprints.com
Chairs are an amazing DIY upholstery entry level
Dining room chairs get plenty of put on and tear. Whether it’s spilled merlot or food stains from sticky fingers, it’s straightforward to breathe new life into a worn-out seat cushion. Before you pull out your bank card and call a reupholstering professional, consider this: All you need to do the job yourself is a staple gun and some new fabric.
A basic chair refresh is a simple beginner upholstery project to strive your hand at, but there are some suggestions to remember, says Andrea Ford, the founder and designer behind the favored Toronto DIY upholstery studio Re:Type Studio.
“Dining chairs are often my recommended starter point to get your palms used to stretching and moulding,” she says. “So many individuals rush this undertaking. Yes, you could take away the previous fabric. And sure, you need to remove the earlier staples. You must doubtless additionally exchange the foam.”
As soon as you’ve tackled a simple chair, you may just begin to see the potential in larger upholstery tasks.
Re:Fashion Studio gives workshops that stroll you through every little thing from BYOP (carry your individual piece) reupholster weekends to constructing your own upholstered headboards and ottomans from scratch. In accordance with Ford, no expertise is needed for the BYOP workshop.
The largest mistake learners make is taking on tasks which can be far too complex earlier than they have a great understanding of fabric behaviour, Ford says.
We’ve obtained you covered with a quick lesson in Upholstery 101 — beginning with, of course, the dining room chair.
What you’ll want:
– Chair with removable seat
– Your chosen fabric (upholstery grade is finest)
– 1” thick high-density seat foam
– Staple gun and staples
– Pliers or flat-blade screwdriver
– Safety gloves and goggles (optional, however recommended to stay safe)
– Spray adhesive (non-obligatory)
Tips on selecting your foam and fabric:
Choosing the foam: Foam chair pads might be found at fabric provide stores such as Fabricland or Barton Floor Coverings on Queen St. The fee will range depending on thickness and size — we used 1” thick foam chair pads from Fabricland ($18.98 for 4) for this venture. It’s better to make use of increased-density foam for chair seats in order that they retain their form. You can simply lower by excessive-density foam with a utility knife. We used scissors to chop by means of the 1” foam.
Selecting the fabric: Look for upholstery-weight fabric, which is durable and might hold up to regular use. However, lighter-weight fabrics made from fabric blends (a mixture of synthetic and pure fibres) will also be used on furnishings used often or if you happen to plan on recovering the chair each so typically. That’s the good thing about starting out with a dining room chair: It’s a simple venture that lets you get away with trying out lighter-weight fabrics, which may be simpler to handle for a newbie.
Step 1: Take off the previous fabric.
Using the screwdriver, unscrew the seat from the chair. Then take away the fabric from the seat by using pliers or a flat-blade screwdriver to take away the old staples attaching the fabric to the seat.
Step 2: Assess and substitute the foam in your chair if obligatory.
Resolve whether or not it’s essential change the foam cushion from the chair seat. It could be nice if it’s new, but a contemporary layer of foam is simple to substitute. Hint around the wooden chair seat on the new foam, including roughly 1/8” (lower than 1/2 cm) bigger than the seat backside. Reduce the foam out utilizing scissors.
Step 3: Lower a chunk of fabric for the chair seat.
Reduce a piece of fabric a little bit bit bigger than the seat of the chair. It should be approximately two to 3 times the thickness of the seat including the foam. Iron the fabric to remove any creases.
Step 4: Add the foam and the fabric to the seat.
Add the reduce foam to the top of the seat and centre the seat on the fabric. If necessary, use a spray adhesive to safe the foam to the wood seat. If the fabric has a pattern, be certain centre it on the seat.
Step 5: Staple the fabric to the seat.
Starting on the centre of the highest edge of the seat, pull the fabric taut; test to ensure the fabric is easy. Staple the fabric to the seat base. Repeat this on the underside edge after which the sides of the seat.
Step 6: Staple the corners of the seat.
After you have stapled each aspect of the seat, you might be ready to do the corners. Gather the fabric at the nook right into a smooth fold, pulling taut, and staple in place. Repeat at each nook.
Step 7: Trim any excess fabric.
Use scissors to trim any excess fabric from the seat so that you get a clear edge.
Step 8: Reattach the seat to the chair.
Screw the freshly upholstered seat back onto the chair base.
More from The Star & Partners
Copyright owned or licensed by Toronto Star Newspapers Restricted. All rights reserved. Republication or distribution of this content material is expressly prohibited with out the prior written consent of Toronto Star Newspapers Restricted and/or its licensors.